|
- Squeeze ¼ inch of lash tint into pigment cap (provided
in kit) or small glass or plastic dish. Mix 3 drops of
Oxidant, stir until creating a smooth paste.
Note: all colors of tint will look brown when first
squeezed out of the tube, until it has had time to oxidize.
- Apply a
small amount of Vaseline around the eyebrows -- for eyebrow
tinting -- and/ or on the upper and lower eyelids for lash
tinting using a Q-tip. Be careful not to get it on the
lashes this will prevent tint to penetrate through the
Vaseline. Have client look up towards the sky so it is
easier for you to apply Vaseline to the skin under the
bottom lashes.
- Place moist
cotton cosmetic pad under the lower lashes. Separate the
cotton pads in half, creating 2-thin layer. This fits
nicely under the lower lash.
- Cover
eyelashes and or eyebrows with tint paste using wooden
applicator sticks, without touching the skin around. Wipe
off any tint touching the skin with a moist Q-tip.
- Cover the
eyes with warm moist eye pads.
- Eyebrow process time: 1 to 2 minutes then check
your color, can always re apply. Care must be taken not to
leave the paste on eyebrows for too long, since too dark of
eyebrows tend to gibe the face a hard expression.
- Eyelash
process time: 5 to 15 minutes. Longer process time
gives deeper color.
- Remove eye
pads and wipe clean with a warm moist cotton pad. Wiping
from the root area down to the tips and onto the lash
shield. Eyes must remain closed until the last trace of
paste has been removed from the eyelashes. Wipe brows until
moist pad shows no sign of tint residue.
- Finish
cleaning the lashes or brows with witch hazel removing all
residual chemicals.
|
